4. I turned on one of the Cameras, or Aux A/V functions created by the Lockpick and all I see is a flashing
picture or blank screen when I try to look at the video.
This means you don’t have anything connected or, do not have the device turned on to supply a video
input. The radio screen will be blank or flash when there is no video from your connected device. Common
solutions for camera pictures are normally resolved by rechecking the power connections and insuring that
all cameras are powered by the connections provided on the Lockpick harness. This includes the factory
rear view camera, if your vehicle requires a Lockpick connection to power it while in a gear other than
reverse. Also, check to make sure you have fully inserted the White connector on the Lockpick harness
and the video connections for your device are plugged in. Connectors not fully inserted may create
intermitting operations.
Lockpick Air Remote Control Operations
The Remote control for the Lockpick Air is battery powered (provided) and
communicates with infra-red light to the included pickup sensor. The sensor plugs
into the Lockpick module and should be placed in the vehicle at a location easily
targeted by the remote. The steering wheel functions can be used along with the
remote control functions at any time. The remote control can allow quicker access
to many of the features of the Lockpick Air without navigating the menu structure
needed by the steering wheel controls. Before using the remote for the first time,
be sure and pull the plastic tab from the battery compartment to engage battery
connections.
Lockpick Air USB Updates
The Lockpick Air includes the ability to be updated via a USB connection to a laptop
PC. If directed to update by one of our technicians, consult our website at
CoastalEtech.com/usbupdate.htm for specific downloads and instructions for your
Lockpick Air. It is not recommended to update the Lockpick without first consulting a
technician.
Activate Lockpick Menus, Air WIFI
functions, or Aux A/V inputs.
Quickly view any camera connected
Activate DVD Override ON or OFF in
vehicles equipped with a factory
DVD player
Quickly select output to be viewed
and heard on external screens
Controls all Lockpick menu scrolling
and selecting operations.
Program any connected camera to
automatically turn on and off
according to gear, speed, or turn
signal activation. Radio will display
and confirm selection on-screen.
Activate Nav Override ON or Off
Automatically times out after 60
seconds.
VID ON-OFF selects and displays
video only from AIR or AUX without
interrupting current radio sound.
Great for video only uses like
Internet or Map operations.
Select BACK to move to last selected
menu or EXIT to turn off Menu.
Select Airplay mode. Toggle
between DLNA (Apple), Miracast
(Android), and WiDi, (Intel).
OFF turns off any audio or video
function
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals