Chrysler 200 Convertible 2012 Owner's Manual download pdf (Page 208)

100

101

means the engine oil change interval may fluctuate

dependent upon your personal driving style.

Unless reset, this message will continue to display each

time you turn the ignition switch to the “ON” position.

To turn off the message temporarily, press and release the

Trip Odometer button on the instrument cluster. To reset

the oil change indicator system (after performing the

scheduled maintenance) perform the following proce-

dure:

1. Turn the ignition switch to the ON/RUN position

(do not start the engine).

2. Fully depress the accelerator pedal slowly 3 times

within 10 seconds.

3. Turn the ignition switch to the LOCK position.

NOTE: If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not

reset. If necessary, repeat this procedure.

4. For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle

Information Center (EVIC)”.

15. Cruise Indicator — If Equipped

This indicator shows that the Electronic Speed

Control System is ON.

16. Odometer/Trip Odometer Reset Button

Trip Odometer

Press and release this button to change the display from

odometer to “Trip A.” Press and release it a second time

to change the display to “Trip B.” Press and release it a

third time to change the display back to the odometer.

To reset the trip odometer, first display the trip mileage

that you want to reset, “Trip A” or “Trip B.” Then push

and hold the button (approximately 2 seconds) until the

display resets to 0 miles (kilometers). The odometer must

be in Trip Mode to reset the trip odometer.

206 UNDERSTANDING YOUR INSTRUMENT PANEL

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 506 507

Comments to this Manuals

No comments

Chrysler 200 Convertible 2012 Owner's Manual Page 208

Comments to this Manuals

Related products and manuals for Cars Chrysler 200 Convertible 2012