Chrysler 200 Convertible 2012 Owner's Manual Page 394

  • Download
  • Add to my manuals
  • Print
  • Page
    / 507
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 393
4. Turn the jack screw to the left until the jack can be
placed under the jacking location. Once the jack is
positioned, turn the jack screw to the right until the jack
head is properly engaged with the lift area closest to the
wheel to be changed. Do not raise the vehicle until you
are sure the jack is securely engaged.
WARNING!
Raising the vehicle higher than necessary can make
the vehicle less stable. It could slip off the jack and
hurt someone near it. Raise the vehicle only enough
to remove the tire.
5. Raise the vehicle by turning the jack screw to the right,
using the swivel wrench. Raise the vehicle only until the
tire just clears the surface and enough clearance is
obtained to install the spare tire. Minimum tire lift
provides maximum stability.
6. Remove the wheel nuts, and pull the wheel and wheel
covers (where applicable) off the hub. Install the spare
wheel and wheel nuts with the cone shaped end of the
nuts toward the wheel. Lightly tighten the nuts.
Rear Jacking Location
392 WHAT TO DO IN EMERGENCIES
Page view 393
1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 506 507

Comments to this Manuals

No comments