Chrysler 200 Convertible 2012 Owner's Manual download pdf (Page 398)

100

101

6. Finish tightening the lug nuts. Push down on the

wrench while at the end of the handle for increased

leverage. Tighten the lug nuts in a star pattern until each

nut has been tightened twice. The correct tightness of

each lug nut is 100 ft/lbs (135 N·m). If in doubt about the

correct tightness, have them checked with a torque

wrench by your authorized dealer or service station.

7. After 25 miles (40 km) check the lug nut torque with a

torque wrench to ensure that all lug nuts are properly

seated against the wheel.

Vehicles Without Wheel Covers

1. Mount the road tire on the axle.

2. Install the remaining lug nuts with the cone shaped

end of the nut toward the wheel. Lightly tighten the lug

nuts.

WARNING!

To avoid the risk of forcing the vehicle off the jack,

do not tighten the wheel nuts fully until the vehicle

has been lowered. Failure to follow this warning may

result in personal injury.

3. Lower the vehicle to the ground by turning the jack

handle counterclockwise.

4. Finish tightening the lug nuts. Push down on the

wrench while at the end of the handle for increased

leverage. Tighten the lug nuts in a star pattern until each

nut has been tightened twice. The correct tightness of

each lug nut is 100 ft/lbs (135 N·m). If in doubt about the

correct tightness, have them checked with a torque

wrench by your authorized dealer or service station.

396 WHAT TO DO IN EMERGENCIES

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 506 507

Comments to this Manuals

No comments

Chrysler 200 Convertible 2012 Owner's Manual Page 398

Comments to this Manuals

Related products and manuals for Cars Chrysler 200 Convertible 2012