Chrysler 2007 300 SRT8 Specifications download pdf (Page 390)

100

101

TRIP ODOMETER button to turn off the message. If the

problem continues, the message will appear the next time

the vehicle is started.

A loose, improperly installed, or damaged fuel filler cap

may also turn on the MIL.

EMISSIONS INSPECTION AND MAINTENANCE

PROGRAMS

In some localities, it may be a legal requirement to pass

an inspection of your vehicle’s emissions control system.

Failure to pass could prevent vehicle registration.

For states that require an I/M (Inspection and

Maintenance), this check verifies the MIL is func-

tioning and is not on when the engine is running,

and that the OBD II system is ready for testing.

Normally, the OBD system will be ready. The OBD II

system may not be ready if your vehicle was recently

serviced or recently had a dead battery or had a battery

replacement. If the OBD II system should be determined

not ready for the I/M test, your vehicle may fail the test.

Your vehicle has a simple ignition key-actuated test,

which you can use prior to going to the test station. To

check if your vehicle’s OBD II system is ready, you must

do the following:

1. Insert your ignition key into the ignition switch.

2. Turn the ignition to the ON position, but do not crank

or start the engine.

3. If you crank or start the engine, you will have to start

this test over.

4. As soon as you turn your key to the ON position, you

will see the MIL symbol come on as part of a normal bulb

check.

388 MAINTAINING YOUR VEHICLE

1 2 ... 385 386 387 388 389 390 391 392 393 394 395 ... 481 482

Comments to this Manuals

No comments

Chrysler 2007 300 SRT8 Specifications Page 390

Comments to this Manuals

Related products and manuals for Cars Chrysler 2007 300 SRT8