Chrysler 2011 300 SRT - User Guide User Manual download pdf (Page 59)

WARNING!

Driving a vehicle with the red brake light on is dangerous. Part of the brake system may

have failed. It will take longer to stop the vehicle. You could have a collision. Have the

vehicle checked immediately.

- Malfunction Indicator Light (MIL)

• Certain conditions, such as a poor fuel quality, etc., may illuminate the MIL after engine start.

The vehicle should be serviced if the light stays on through several typical driving cycles. In

most situations, the vehicle will drive normally and not require towing.

• If the MIL flashes when the engine is running, serious conditions may exist that could lead to

immediate loss of power or severe catalytic converter damage. We recommend you do not

operate the vehicle. Have the vehicle serviced immediately.

- Electronic Stability Control (ESC) OFF Indicator Light

• This light indicates the Electronic Stability Control (ESC) is off.

- Charging System Light

• This light shows the status of the electrical charging system. If the charging system light

remains on, it means that the vehicle is experiencing a problem with the charging system.

• We recommend you do not continue driving if the charging system light is on. Have the vehicle

serviced immediately.

- Oil Pressure Warning Light

• This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle

and shut off the engine as soon as possible. A chime will sound for four minutes when this light

turns on.

• We recommend you do not operate the vehicle or engine damage will occur. Have the vehicle

serviced immediately.

- Anti-Lock Brake (ABS) Light

• This light monitors the Anti-Lock Brake System (ABS).

• If the light is not on during starting, stays on, or turns on while driving, we recommend you drive

to the nearest service center and have the vehicle serviced immediately.

WHAT TO DO IN EMERGENCIES

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

No comments

Chrysler 2011 300 SRT - User Guide User Manual Page 59