Chrysler Stealth 1994 User Manual download pdf (Page 4)

Testing Engine, Transmission, ABS, and SRS Systems

Chapter 5

IMPORTANT:

Do not use the battery pack when connecting to Chrysler Import vehicles. Use the Lighter

Power Cable or Battery Power Cable.

5.1.2 ABS Manual Code Reading

Chrysler Import antilock brake systems (ABS) transmit Type 11 codes. Figure 5-6 shows how

codes display. Table 5-2 explains how to read the codes.

Figure 5-6 Chrysler Imports antilock brake Code Type 11

5.1.3 Clearing Codes

Trouble codes can be cleared from PCM memory with the scan tool on most 1988 and later

models. Select CLEAR ECM CODES from the scan tool Exit menu (Figure 5-7).

Figure 5-7 CLEAR ECM CODES selection

Table 5-2 Chrysler Import ABS codes type 11

Pattern: For code output: long and short

Read codes on: ABS warning lamp

Start codes by:

16-pin OBD-II DLC: jumper terminal 1 to ground; or analog meter across

terminals 4 or 5 to terminal 8.

12-pin connector: analog meter across terminals 4 and 12.

When done: Turn the ignition off, then clear codes.

Code display cycle repeats as long as system is in the diagnostic state. A battery surge that causes

the ABS system to fail may cause Code 16 to set.

0.5 Sec.

1.5 Sec. 1.5 Sec.

1.5 Sec.

2 Sec.

Pause

3 Sec.

Pause

First Digit Second Digit

Code 24

No Codes to Output

Off

RESUME LED MENU

PRINT SCREEN > CLEAR ECM CODES

PRINT FRAME FIX LINE 2

ARM MOVIE

1 2 3 4 5 6 7 8

No comments

Chrysler Stealth 1994 User Manual Page 4