Chrysler MEDIA CENTER 430 Owner's Manual download pdf (Page 95)

Audio Jack (AUX) Mode

The Audio Jack connector allows you to connect the

headset output of an audio device (e.g., MP3 player) to

the radio. The audio of the connected device will then be

played through the radio sound system.

Connect a 3.5 mm

stereo

mini-jack cable as shown above

(not provided with the radio) to the Audio Jack connector

on the radio and to the earphone connector of your audio

device.

The display will switch automatically to the AUX mode

when a 3.5 mm

stereo

mini-jack cable has been connected.

The radio screen will revert back to the last tuner mode

when the cable is unplugged.

To change radio modes while the cable is connected to

the unit, press the MEDIA hard-key to display the AUX

tab. Touch the AUX tab to return to the AUX mode.

Adjust the volume with the ON/OFF VOLUME rotary

knob or with the volume of the attached device.

The control of the external device (e.g., selecting playlists,

play, fast forward, etc.) cannot be provided by the radio;

use the device controls instead.

NOTE: Inserting of a

mono

jack will result in improper

audio playback.

94 Uconnect® Multimedia (REMOTE DEVICES)

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 164 165

No comments

Chrysler MEDIA CENTER 430 Owner's Manual Page 95