Chrysler 300SRT User Manual download pdf (Page 354)

100

101

2. Remove the Speed Limit sticker from the top of the

Sealant Bottle (1) and place the sticker on the instrument

panel.

3. Immediately disconnect the Sealant Hose (6) from the

valve stem, reinstall the yellow cap on the fitting at the

end of the hose, and place the TIREFIT kit in the vehicle

storage location. Quickly proceed to (D) “Securing TIRE-

FIT Sealant in the Tire”.

CAUTION!

•

The metal end fitting from Power Plug (8) may get

hot after use, so should be handled carefully.

•

Failure to reinstall the yellow cap on the fitting at

the end of the Sealant Hose (6) can result in sealant

contacting your skin, clothing, and the vehicle’s

interior. It can also result in sealant contacting

internal TIREFIT kit components which may

cause permanent damage to the kit.

(D) Securing TIREFIT Sealant in the Tire:

Immediately after injecting sealant, and inflating tire,

drive the vehicle 5 miles (8 km) or 10 minutes to ensure

distribution of the TIREFIT Sealant within the tire. Do not

exceed 55 mph (88 km/h).

WARNING!

TIREFIT is not a permanent flat tire repair. Have the

tire inspected and repaired or replaced after using

TIREFIT. Do not exceed 55 mph (88 km/h) until

having the tire repaired or replaced. Failure to follow

this warning can result in injuries that are serious or

fatal to you, your passengers, and others around you.

(E) After Securing TIREFIT Sealant in the Tire:

Follow Step (A) “Whenever You Stop to Use TIREFIT”

before continuing.

WHAT TO DO IN EMERGENCIES 353

1 2 ... 349 350 351 352 353 354 355 356 357 358 359 ... 464 465

Comments to this Manuals

No comments

Chrysler 300SRT User Manual Page 354

Comments to this Manuals

Related products and manuals for Cars Chrysler 300SRT