CONNECT USB CABLE HERE FOR FUTURE UPDATESOPTIONAL POWER OUTPUTSIDENTIFIED BY COLOR AND PRINTING ON WIRE TO LOCKPICK BLACK GROUND WIRE TO LOCKPICK BLAC
**IMPORTANT** IF YOUR RADIO DOES NOT ALREADY HAS THE FACTORY UCONNECT FEATURE PRESENT, FOLLOW THE INITIALIZATION SEQUENCE BELOW. AFTER PLUGGING IN T
The A/V OUTPUTS on the Lockpick V.5 harness can output the MYGIG DVD video and audio directly to a rear screen system. The MYGIG radio is capable
Any option for output is available on the radio or media tabs. The VES output options are not selectable as they are applicable only to a factory
7. I turned on one of the Camera or VES AUX input functions created by the Lockpick and all I see is a flashing picture or blank screen when I try t
USB UPDATING (make sure module is also connected to Lockpick harness and vehicle) Your Lockpick FIM interface includes the ability to be updated
MYGIG FREEDOM IN MOTION LOCKPICK V.5 CABLE ASSEMBLY AND INSTALLATION INSTRUCTIONS ENCLOSED
CONTROLS ON BACK OF STEERING WHEELCAM OFFPRESS TO TOGGLE BETWEENVIDEO INPUT 1 (FRONT OR LEFT CAM)OR VIDEO INPUT 2 (BABY OR RIGHT CAM)PRESS TO TOGGLE T
Coastal Electronic Technologies, Inc. Chrysler/Dodge/Jeep FREEDOM IN MOTION MYGIG LOCKPICK Installation and Operation Instructions Thank you for y
OK, let’s get started. On your FIM LOCKPICK V. 5 control box are switch settings which allow you to program your Lockpick for your vehic
APPLICATION GUIDE ADDITIONAL VEHICLES MAY APPLY OR BE ADDED LATER IMPORTANT VEHICLE COMMUNICATION PROGRAMMING SETTINGS IDENTIFY YOUR VEHICLE FROM THE
The MYGIG LOCKPICK V.5 is designed with simple “T” harness connectors, equipped with factory male and female connectors for direct connectio
If your installation requires the use of the REVERSE CAMERA POWER Lockpick wire to enable factory camera operation in all gears, it is simply a
MYGIG LOCKPICK V.5 OPERATION INSTRUCTIONS The MYGIG LOCKPICK V.5 automatically activates the TV mode and generates
If your vehicle is already equipped with Sat TV, the Mygig Lockpick V.4 will automatically detect the factory system and ad
Comments to this Manuals