Any option for output is available on the radio or media tabs. The VES output options are
not selectable as they are applicable only to a factory VES system. If you would like to send
out the picture and the sound from a DVD playing in the MYGIG radio to your additional
screen, select the MEDIA tab and then the DISC option. The DVD in your MYGIG radio
will continue to play and output its audio and video to your rear seat system even if you then
switch to any of the different functions available on the MYGIG radio for the front seat
operator.
Thank you for your trust in Coastal Electronic Technologies, Inc.
Installation Q & A:
1. I installed the Lockpick and now my radio does not turn on.
Check all interface controls and switches. Insure that vehicle select is set for (0) and that option switches 1
and 2 and correctly set them for the vehicle type (see application chart). Check to make sure you have
installed the Gray connector behind the radio and that all pins were straight before fully inserting the
connectors.
2. When I put the car in Reverse, the radio screen blanks out. I do not have a rear view camera.
The Lockpick automatically activates a rear view camera input for your radio. If you do not intend to
install a rear view camera or do not want it activated automatically, refer to page 2 of the Lockpick options
in the TV mode to disable the AUTO REAR function.
3. I installed the Lockpick but I do not see a VES mode.
The default setting for the Lockpick is VES mode OFF. To activate the VES mode and take advantage of
the audio and video inputs provided by the Lockpick harness, select the ADD VES option on page 3 of the
Lockpick options menus. After setting the option to ON, turn the car off and then back on. The VES mode
will be activated and ready for use.
4. I installed the Lockpick and now my factory VES rear entertainment is intermitting.
The Lockpick is able to create a VES mode within your radio to allow a multimedia audio and video input
as well as an output for additional screen(s) if desired. The default setting on page 3 of the Lockpick
options is VES OFF. If you change the option and turn it ON when you already have a factory VES system,
the communication will conflict. Set the option to OFF to restore factory VES operation.
5. My radio does not have a VIDEO button viewable at any time. Will the Lockpick work for this car?
The Lockpick will enable the video function regardless of whether it is currently activated.
6. I do not have a navigation radio or my radio is a new RHB navigation radio. Will the Lockpick turn on the
Uconnect and voice recognition functions?
No, these radios do not have the hardware internally to receive Bluetooth or provide support for voice
recognition. The Lockpick will remove the error message saying the feature is not active when the
Uconnect button is pressed. Follow the initialization procedure described earlier.
(11 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals