Chrysler 300 2013 Owner's Manual Page 473

  • Download
  • Add to my manuals
  • Print
  • Page
    / 586
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 472
1. Remove the spare tire, jack, and lug wrench.
2. If equipped with aluminum wheels where the center
cap covers the lug nuts, use the lug wrench to pry the
center cap off carefully before raising the vehicle.
3. Before raising the vehicle, use the lug wrench to
loosen, but not remove, the lug nuts on the wheel with
the flat tire. Turn the lug nuts counterclockwise one
turn while the wheel is still on the ground.
4. Place the jack underneath the lift area that is closest to
the flat tire. Turn the jack screw clockwise to firmly
engage the jack saddle with the lift area of the sill
flange.
NOTE: If the vehicle is too low for jack placement, slide
the jack on its side and rotate it up into position.
Front Jacking Location
6
WHAT TO DO IN EMERGENCIES 471
Information Provided by:
Page view 472
1 2 ... 468 469 470 471 472 473 474 475 476 477 478 ... 585 586

Comments to this Manuals

No comments