Chrysler 300 2014 Owner's Manual download pdf (Page 535)

100

101

Adding Coolant

Your vehicle has been built with an improved engine

coolant (OAT coolant conforming to MS-12106) that

allows extended maintenance intervals. This engine cool-

ant (antifreeze) can be used up to ten years or 150,000

miles (240,000 km) before replacement. To prevent reduc-

ing this extended maintenance period, it is important that

you use the same engine coolant (OAT coolant conform-

ing to MS-12106) throughout the life of your vehicle.

Please review these recommendations for using Organic

Additive Technology (OAT) engine coolant (antifreeze)

that meets the requirements of Chrysler Material Stan-

dard MS-12106. When adding engine coolant (antifreeze):

• We recommend using MOPAR® Antifreeze/Coolant

10 Year/150,000 Mile Formula OAT (Organic Additive

Technology) that meets the requirements of Chrysler

Material Standard MS-12106.

• Mix a minimum solution of 50% OAT engine coolant

that meets the requirements of Chrysler Material Stan-

dard MS-12106 and distilled water. Use higher concen-

trations (not to exceed 70%) if temperatures below

−34° F (−37° C) are anticipated.

• Use only high purity water such as distilled or deion-

ized water when mixing the water/engine coolant

(antifreeze) solution. The use of lower quality water

will reduce the amount of corrosion protection in the

engine cooling system.

Please note that it is the owner’s responsibility to main-

tain the proper level of protection against freezing ac-

cording to the temperatures occurring in the area where

the vehicle is operated.

MAINTAINING YOUR VEHICLE 533

1 2 ... 530 531 532 533 534 535 536 537 538 539 540 ... 614 615

Comments to this Manuals

No comments

Chrysler 300 2014 Owner's Manual Page 535

Comments to this Manuals

Related products and manuals for Cars Chrysler 300 2014