Chrysler 300 2014 Owner's Manual download pdf (Page 543)

100

101

In addition, change the fluid and filter if the fluid

becomes contaminated (with water, etc.), or if the trans-

mission is disassembled for any reason.

Fluid And Filter Changes — 8-Speed Transmission

Under normal operating conditions, the fluid installed at

the factory will provide satisfactory lubrication for the

life of the vehicle. Routine fluid and filter changes are not

required. However, change the fluid and filter if the fluid

becomes contaminated (with water, etc.), or if the trans-

mission is disassembled for any reason.

All Wheel Drive (AWD) — If Equipped

The all wheel drive system consists of a transfer case and

front differential. The exterior surface of these compo-

nents should be inspected for evidence of fluid leaks.

Confirmed leaks should be repaired as soon as possible.

The transfer case fluid fill/inspection plug is located in

the middle of the rear housing. To inspect the transfer

case fluid level, remove the fill/inspection plug. The

fluid level should be even with the bottom of the hole.

Use this plug to add fluid as required.

The front differential fill plug is located on the outer

cover near the halfshaft attachment. To inspect the differ-

ential fluid level, remove the fill plug. The fluid level

should be even with or slightly below the bottom of the

hole.

Fluid Changes

Refer to the “Maintenance Schedule” for the proper

maintenance intervals.

Rear Axle

For normal service, periodic fluid level checks are not

required. When the vehicle is serviced for other reasons the

exterior surfaces of the axle assembly should be inspected.

MAINTAINING YOUR VEHICLE 541

1 2 ... 538 539 540 541 542 543 544 545 546 547 548 ... 614 615

Comments to this Manuals

No comments

Chrysler 300 2014 Owner's Manual Page 543

Comments to this Manuals

Related products and manuals for Cars Chrysler 300 2014