Chrysler 300SRT User Manual download pdf (Page 356)

100

101

(F) Sealant Bottle and Hose Replacement:

1. Uncoil the Sealant Hose (6).

2. Locate the rectangular Sealant Bottle release button in

the recessed area where you place your fingers to unlatch

the hoses (6) (7) from their storage area.

3. Use the yellow cap on end of the Sealant Hose (6) to

depress the Sealant Bottle release button. The Sealant

Bottle (1) will pop up. Remove the bottle and dispose of

it accordingly.

4. Clean any remaining sealant from the TIREFIT hous-

ing.

5. Position the new Sealant Bottle (1) to the housing so

that the Sealant Hose (6) aligns with the hose slot in the

front of the housing and the alignment keys on the

bottom of the bottle align with the alignment slots in the

housing. Then, press the bottle into the housing. An

audible click will be heard, indicating the bottle is locked

in place.

6. Verify the yellow cap is installed on the fitting at the

end of the Sealant Hose (6) and return the hose to its

storage area (located on the bottom of the air pump).

7. Return the TIREFIT kit to its storage location in the

vehicle.

JUMP-STARTING PROCEDURES

If your vehicle has a discharged battery it can be jump-

started using a set of jumper cables and a battery in

another vehicle or by using a portable battery booster

pack. Jump-starting can be dangerous if done improperly

so please follow the procedures in this section carefully.

NOTE: When using a portable battery booster pack

follow the manufacturer’s operating instructions and

precautions.

WHAT TO DO IN EMERGENCIES 355

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 464 465

Comments to this Manuals

No comments

Chrysler 300SRT User Manual Page 356

Comments to this Manuals

Related products and manuals for Cars Chrysler 300SRT