Chrysler 300SRT User Manual download pdf (Page 53)

100

101

BeltAlert威 Programming

The BeltAlert威 can be enabled or disabled by your

authorized dealer or by performing the following steps:

NOTE: Chrysler Group LLC does not recommend de-

activating the BeltAlert威.

1. With all doors closed, and the ignition switch in any

position except RUN or START, buckle the driver’s seat

belt.

2. Turn the ignition switch to the RUN position, but do

not start the engine. Wait for the Seat Belt Reminder Light

to turn off and then proceed to the next step.

NOTE: You must perform the following steps within

60 seconds of turning the ignition switch to the RUN

position.

3. Within 60 seconds of turning the ignition switch to the

RUN position, unbuckle and then re-buckle the driver’s

seat belt at least three times within 10 seconds, ending

with the seat belt buckled.

NOTE: Watch for the Seat Belt Reminder Light to turn

on while unbuckling the seat belt and turn off while

re-buckling the seat belt. It may be necessary to retract

the seat belt.

4. Turn the ignition switch to the OFF position. A single

chime will sound to signify that you have successfully

completed the programming.

BeltAlert威 can be reactivated by repeating this procedure.

NOTE: Although BeltAlert威 has been deactivated, the

Seat Belt Reminder Light will continue to illuminate as

long as the driver’s seat belt is unbuckled.

52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 464 465

Comments to this Manuals

No comments

Chrysler 300SRT User Manual Page 53

Comments to this Manuals

Related products and manuals for Cars Chrysler 300SRT