Chrysler RAM CHASSIS CAB 3500 Owner's Manual download pdf (Page 253)

100

101

Normal Starting

Normal starting of either a warm or cold engine is

obtained without pumping or depressing the accelerator

pedal. Turn the key to the START position and release

when the engine starts. If the engine fails to start within

10 seconds, turn the key to the OFF position, wait 5

seconds, then repeat the starting procedure.

NOTE: This vehicle is equipped with a transmission

shift interlocking system. The brake pedal must be

depressed to shift out of Park (P).

Tip Start Feature — Automatic Transmission Only

Do not press the accelerator. Turn the ignition key briefly

to START position, and release it. The starter motor will

continue to run, but will automatically disengage itself

when the engine is running.

If Engine Fails To Start

If the engine fails to start after you have followed the

normal starting procedure, it may be flooded. Push the

accelerator pedal all the way to the floor and hold it there

while cranking the engine. This should clear any excess

fuel in case the engine is flooded.

Ignition Key Positions

STARTING AND OPERATING 253

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 527 528

Comments to this Manuals

No comments

Chrysler RAM CHASSIS CAB 3500 Owner's Manual Page 253

Comments to this Manuals

Related products and manuals for Cars Chrysler RAM CHASSIS CAB 3500