Chrysler RAM CHASSIS CAB 3500 Owner's Manual download pdf (Page 385)

100

101

8. Lower the jack to its fully closed position. If the jack

will not lower by turning the dial (thumb wheel) by

hand, it may be necessary to use the jack drive tube in

order to lower the jack. Stow the replaced tire, jack, and

tools as previously described.

9. Adjust the tire pressure when possible.

NOTE: Do not oil wheel studs. For chrome wheels, do

not substitute with chrome plated wheel nuts.

Hub Caps/Wheel Covers — If Equipped

The hub caps must be removed before raising the vehicle

off the ground.

For single rear wheel (SRW) models, use the blade on the

end of the lug wrench to pry the hub cap off. Insert the

blade end into the pryoff notch and carefully pop off the

hub cap with a back and forth motion.

On 3500 models with dual rear wheels (DRW), you must

first remove the hub caps. The jack handle driver has a

hook at one end that will fit in the pry off notch of the

rear hub caps. Position the hook and pull out on the

ratchet firmly. The hub cap should pop off. The wheel

skins can now be removed. For the front hub cap on

models use the blade on the end of the lug wrench to pry

the caps off. The wheel skin can now be removed.

CAUTION!

Use a back and forth motion to remove the hub cap.

Do not use a twisting motion when removingthe hub

cap, damage to the hub cap finish may occur.

WHAT TO DO IN EMERGENCIES 385

1 2 ... 380 381 382 383 384 385 386 387 388 389 390 ... 527 528

Comments to this Manuals

No comments

Chrysler RAM CHASSIS CAB 3500 Owner's Manual Page 385

Comments to this Manuals

Related products and manuals for Cars Chrysler RAM CHASSIS CAB 3500