Chrysler RAM CHASSIS CAB 3500 Owner's Manual Page 264

  • Download
  • Add to my manuals
  • Print
  • Page
    / 528
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 263
Engine Block Heater
The engine block heater warms engine coolant and
permits quickerstarts in cold weather. Connect the heater
cord to a ground–fault interrupter protected 110–115 volt
AC electrical outlet with a grounded, three-wire exten-
sion cord.
The engine block heater cord is routed under the hood to
the right side and can be located just behind the grille
near the headlamp.
NOTE: The engine block heater cord is a factory in-
stalled option. If your vehicle is not equipped, heater
cords are available from your authorized Mopart dealer.
The block heater must be plugged in at least one hour to
have an adequate warming effect on the coolant.
WARNING!
Remember to disconnect the cord before driving.
Damage to the 110–115 volt electrical cord could
cause electrocution.
NOTE: The block heater will require 110 Volts AC and
6.5 Amps to activate the heater element.
Block Heater Usage
A. Temperatures below 0°F (-18°C)
Block Heater Required for 15W-40
Block Heater Recommended for 5W-40
B. Temperatures below - 20°F (-29°C)
Block Heater Required for 5W-40
264 STARTING AND OPERATING
Page view 263
1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 527 528

Comments to this Manuals

No comments